BGXDC - CP-66;GREASE MOLYBDENUM.DISULFIDE

  • MSDS: BGXDC
  • Manufacturer: E M CORP
  • Product Name: CP-66;GREASE MOLYBDENUM.DISULFIDE
  • National Stock Number: 9150-00-753-4830
Product Identification

Product ID:CP-66;GREASE MOLYBDENUM.DISULFIDE
MSDS Date:11/20/1985
FSC:9150
NIIN:00-753-4830
MSDS Number: BGXDC

Responsible Party
E/M CORPORATION
HWY 52 NW,
WEST LAFAYETTE, IN 47906
US

Emergency Phone: 317-463-2511

Info Phone: 313-463-2511

Preparer: CHARLES J BEALL

Cage: EMCOR

Contractor
E/M CORPORATION
2400 WEST LAFAYETTE, IN 47906 US

Telephone: (317) 497-6100

Cage: EMCOR

Ingredients

MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

OSHA PEL 10 MG/M3 TDUST (MO)

ACGIH TLV: 10 MG/M3 (MO); 8990

Hazards

Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF
EYES,SKIN,RESPIRATORY OR G.I. TRACT;REDNESS OR BLURRED VISION,G.I.
TRACT DISTURBANCE,NAUSEA,VOMITING
DIARRHEA.CHRONIC:DERMATITIS,IRRITATION.
Explanation of Carcinogenicity:NO DATA AVAILABLE.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.

First Aid

First Aid:SKIN:WASH WITH SOAP & WATER;EYES;FLUSH WITH PLENTY OF WATER
FOR ABOUT 15 MINUTES,CALL A PHYSICIAN. INGESTION;DO NOT INDUCE
VOMITING,KEEP WARM,GET MEDICAL ATTENTION,IMMEDIATELY.

Fire Fighting

Flash Point:388F/198C
Extinguishing Media:CO*2,FOAMDRY CHEMICAL,OR HALON.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:IRRITATION OR TOXIC VAPORS?MIST
INCLUDING,CO,CO*2,H*25,& SO*2.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION:REMOVE ALL
IGNITION SOURCES;USE SUITABLE INERT ABSORBENT MATERIAL AND RECOVER
FOR PROPER DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN A COOL,DRY AND WELL
VENTILATED AREA.KEEP AWAY FROM ACIDS,ALKALIS,OPEN FLAMES.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST IF ABOVE PEL/TLV.
Ventilation:LOCAL EXHAUST TO MAINTAIN PEL/TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES /GLASSES
Other Protective Equipment:APRON,EYE-WASH FOUNTAIN.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT TAKE
INTERNALLY.
Supplemental Safety and Health

Chemical Properties

HCC:V6
Spec Gravity:1.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY/BLACK PASTE,MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT,OPEN FLAMES

Disposal

Waste Disposal Methods:INCINERATION OR DISPOSAL MUST BE IN ACCORDANCE
WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.